How to Check Your Tire Tread and Pressure

Tires are the only part of your car that touches the road. Two quick checks once a month — pressure and tread — make a big difference for safety, fuel economy, and tire life.

Checking Tire Pressure

  1. Find the recommended pressure on the sticker inside the driver’s door jamb (not the number on the tire sidewall, which is the maximum)
  2. Check when the tires are cold — before driving or after the car has sat for a few hours
  3. Remove the valve cap and press a tire gauge firmly onto the valve
  4. Add air if low, or press the valve core briefly to release air if high
  5. Don’t forget the spare if your car has one

Pressure drops in cold weather, so check more often as temperatures fall.

Checking Tread Depth

New tires typically start with about 10/32 to 11/32 of an inch of tread. Many experts recommend replacing tires around 4/32 inch for good wet-weather grip, and they are generally considered worn out at 2/32 inch.

Penny test: Insert a penny upside down into a tread groove. If you can see all of Lincoln’s head, the tread is very low.

Quarter test: Using a quarter the same way, if you can see all of Washington’s head, you’re likely below 4/32 inch and should start shopping.

Tires also have tread wear bars — small raised bars in the grooves. When the tread is flush with them, it’s time to replace.

Look for Uneven Wear

  • Center worn: Overinflation
  • Both edges worn: Underinflation
  • One edge worn: Alignment problem

Quick Summary

  • Use the door jamb sticker for correct pressure
  • Check pressure cold, at least monthly
  • Use the penny or quarter test for tread
  • Uneven wear can signal pressure or alignment issues

Leave a Reply

Your email address will not be published. Required fields are marked *