Tires are the only part of your car that touches the road. Two quick checks once a month — pressure and tread — make a big difference for safety, fuel economy, and tire life.
Checking Tire Pressure
- Find the recommended pressure on the sticker inside the driver’s door jamb (not the number on the tire sidewall, which is the maximum)
- Check when the tires are cold — before driving or after the car has sat for a few hours
- Remove the valve cap and press a tire gauge firmly onto the valve
- Add air if low, or press the valve core briefly to release air if high
- Don’t forget the spare if your car has one
Pressure drops in cold weather, so check more often as temperatures fall.
Checking Tread Depth
New tires typically start with about 10/32 to 11/32 of an inch of tread. Many experts recommend replacing tires around 4/32 inch for good wet-weather grip, and they are generally considered worn out at 2/32 inch.
Penny test: Insert a penny upside down into a tread groove. If you can see all of Lincoln’s head, the tread is very low.
Quarter test: Using a quarter the same way, if you can see all of Washington’s head, you’re likely below 4/32 inch and should start shopping.
Tires also have tread wear bars — small raised bars in the grooves. When the tread is flush with them, it’s time to replace.
Look for Uneven Wear
- Center worn: Overinflation
- Both edges worn: Underinflation
- One edge worn: Alignment problem
Quick Summary
- Use the door jamb sticker for correct pressure
- Check pressure cold, at least monthly
- Use the penny or quarter test for tread
- Uneven wear can signal pressure or alignment issues